There is also a checkbox called Auto fan stop you can use if you want your fans to stop entirely once temps fall below your minimum settings. That’s everything, you can now click Apply to save the changes. Increasing the time will make all fan speed changes a lot smoother and you won’t get those annoying noise spikes as your fan speed increases for 1 or 2-second temperature fluctuations. Finally, use the Temperature Interval slider at the bottom to adjust the ramp-up speed (the time it takes for the fans to reach certain speeds).This will probably be different for you though. The rest of the fan curve is entirely up to you, however, I usually adjust the bottom dot to 30% at 50c then adjust the dots in between to make a nice gradual curve.So if it hits 90c set 90c as 100% fan speed. The first thing to do is move the top dot to the maximum temperature your CPU reaches. Now that you know exactly where your CPU will max out, you can adjust your fan settings accordingly.This will stress test your CPU to see where it will max out, with SIV open you will be able to see the red dot move around. To do this, Download FurMark, then open it and click CPU burner on the main screen.If you have no idea what temperature your CPU maxes out at under load or what temperature it idles at, you’ll want to find out that information before planning out a fan curve.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |